DCDC bihurgailu erresonante isolatua

DCDC transformadore erresonante isolatu baten prototipoaren fabrikazio

Proposal of Hybrid Discontinuous PWM Technique for Five-Phase Inverters under Open-Phase Fault Operation

One of the most common issues in inverters are open-circuit faults (OPF). In this scenario, a proper fault-tolerant technique must be used to improve the motor performance. Although basic fault-tolerant modulation techniques are normally preferred, this paper proposes a discontinuous pulse-width modulation algorithm (HD-PWM) to operate five-phase inverters under a single OPF. In particular, loss equalization between the remaining switches after a fault occurs is the main objective of the HD-PWM algorithm, thus preventing future faults from occurring. The efficiency and harmonic distortion of the proposed technique are compared to the well-known sinusoidal PWM by simulation and experimentation under OPF conditions. The results obtained show a great performance of the proposed modulation technique, obtaining a relevant efficiency improvement.This work has been supported in part by the Government of the Basque Country within the fund for research groups of the Basque University system IT1440-22 and the MCIN/AEI/10.13039/501100011033 within the project PID2020-115126RB-I00

Common-mode voltage elimination in multilevel power inverter-based motor drive applications

The industry and academia are focusing their efforts on finding more efficient and reliable electrical machines and motor drives. However, many of the motors driven by pulse-width modulated converters face the recurring problem of common-mode voltage (CMV). In fact, this voltage leads to other problems such as bearing breakdown, deterioration of the stator winding insulation and electromagnetic interferences (EMI) that can affect the lifespan and correct operation of the motors. In this sense, multilevel converters have proven to be a useful tool for solving these problems and mitigating CMV over the past few decades. Among other reasons, because they provide additional degrees of freedom when comparing with two-level converters. However, although there are several proposals in the scientific literature on this topic, no complete information has been reviewed about the CMV issues and the different multilevel alternatives that can be used to solve it. In this context, the objective of this work is to determine how multilevel power converters provide additional degrees of freedom to make the reduction of the CMV possible by using specific modulation techniques, making it easier for engineers and scientists in this field to find solutions to this problem. This document consists of a descriptive study that collects the strengths and weaknesses of most important multilevel power converters, with special emphasis on how CMV affects each of them. In addition, the differences of modulation techniques aimed to the CMV reduction are explained in terms of output voltage, operating linear range, and generated CMV. Considering this last, it is recommended to use those modulation techniques that allow the generation of CMV levels of 0 V in order to be able to completely eliminate said voltage.This work was supported in part by the Government of the Basque Country within the Fund for Research Groups of the Basque University System under Grant IT978-16; in part by the Research Program ELKARTEK under Project ENSOL2-KK-2020/00077; in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya; in part by the Ministerio de Ciencia, Innovacion y Universidades of Spain under Project PID2019-111420RB-I00 and Project PID2020-115126RB-I00; and in part by the FEDER Funds.Peer ReviewedPostprint (author's final draft

High-Voltage Stations for Electric Vehicle Fast-Charging: Trends, Standards, Charging Modes and Comparison of Unity Power-Factor Rectifiers

Emission of greenhouse gases and scarcity of fossil fuels have put the focus of the scientific community, industry and society on the electric vehicle (EV). In order to reduce CO2 emissions, cutting-edge policies and regulations are being imposed worldwide, where the use of EVs is being encouraged. In the best of scenarios reaching 245 million EVs by 2030 is expected. Extensive use of EV-s requires the installation of a wide grid of charging stations and it is very important to stablish the best charging power topology in terms of efficiency and impact in the grid. This paper presents a review of the most relevant issues in EV charging station power topologies. This review includes the impact of the battery technology, currently existing standards and proposals for power converters in the charging stations. In this review process, some disadvantages of current chargers have been identified, such as poor efficiency and power factor. To solve these limitations, five unidirectional three-phase rectifier topologies have been proposed for fast EV charging stations that enhance the current situation of chargers. Simulation results show that all the proposed topologies improve the power factor issue without penalizing efficiency. The topologies with the best overall performance are the Vienna 6-switch and the Vienna T-type rectifier. These two converters achieve high efficiency and power factor, and they allow a better distribution of losses among semiconductors, which significantly increase the life-cycle of the semiconductor devices and the reliability of the converter.This work was supported in part by the Government of the Basque Country through the Fund for Research Groups of the Basque University System under Grant IT978-16, in part by the Research Program ELKARTEK under Project ENSOL2-KK-2020/00077 and Project HARVESTGEN-KK-2020/00113, in part by the Ministerio de Ciencia e Innovacion of Spain under Project PID2020-115126RB-I00, and in part by the FEDER Funds. Documen

Wide Bandgap semiconductor HF-oscillation attenuation method with tuned gate RLC filter

Wide Bandgap (WBG) transistors provide better switching performance and higher operating temperatures compared to state of the art Si devices and are suited for high frequency applications due to very short switching times. The main obstacle for implementation of WBG transistors at full potential is the high frequency oscillation in voltage and current during switching transients. Oscillations arise from resonance due to parasitic and device inductances and capacitances. Introduction of WBG transistors depends on the elimination of these oscillations and their negative effect on the performance of power converters. Good layout practice is mandatory, but there is a limit to the reduction of these parasitics and, often, slowing of the semiconductor switching time must be applied. This paper presents a simple methodology for the attenuation of the negative effects of WBG transistor high frequency oscillations without increasing rise and fall times. The proposed methodology is based on determination of the source of feedback resonant frequency between gate and power loops using network analyzer measurement on PCB and utilization of tuned RLC filter. Experimental application of the methodology shows direct relationship between loop resonant frequency and voltage and current oscillations. The proposed method reduces power losses, high frequency oscillations and EMI.UPV/EHU IT978-16, GV/EJ (Elkartek) KK-2018/0004

Common-Mode Voltage Elimination in Multilevel Power Inverter-Based Motor Drive Applications

[EN] The industry and academia are focusing their efforts on finding more efficient and reliable electrical machines and motor drives. However, many of the motors driven by pulse-width modulated converters face the recurring problem of common-mode voltage (CMV). In fact, this voltage leads to other problems such as bearing breakdown, deterioration of the stator winding insulation and electromagnetic interferences (EMI) that can affect the lifespan and correct operation of the motors. In this sense, multilevel converters have proven to be a useful tool for solving these problems and mitigating CMV over the past few decades. Among other reasons, because they provide additional degrees of freedom when comparing with two-level converters. However, although there are several proposals in the scientific literature on this topic, no complete information has been reviewed about the CMV issues and the different multilevel alternatives that can be used to solve it. In this context, the objective of this work is to determine how multilevel power converters provide additional degrees of freedom to make the reduction of the CMV possible by using specific modulation techniques, making it easier for engineers and scientists in this field to find solutions to this problem. This document consists of a descriptive study that collects the strengths and weaknesses of most important multilevel power converters, with special emphasis on how CMV affects each of them. In addition, the differences of modulation techniques aimed to the CMV reduction are explained in terms of output voltage, operating linear range, and generated CMV. Considering this last, it is recommended to use those modulation techniques that allow the generation of CMV levels of 0 V in order to be able to completely eliminate said voltage.This work was supported in part by the Government of the Basque Country within the Fund for Research Groups of the Basque University System under Grant IT978-16; in part by the Research Program ELKARTEK under Project ENSOL2-KK-2020/00077; in part by the Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya; in part by the Ministerio de Ciencia, Innovacion y Universidades of Spain under Project PID2019-111420RB-I00 and Project PID2020-115126RB-I00; and in part by the FEDER Funds

The role of power device technology in the electric vehicle powertrain

In the automotive industry, the design and implementation of power converters and especially inverters, are at a turning point. Silicon (Si) IGBTs are at present the most widely used power semiconductors in most commercial vehicles. However, this trend is beginning to change with the appearance of wide-bandgap (WBG) devices, particularly silicon carbide (SiC) and gallium nitride (GaN). It is therefore advisable to review their main features and advantages, to update the degree of their market penetration, and to identify the most commonly used alternatives in automotive inverters. In this paper, the aim is therefore to summarize the most relevant characteristics of power inverters, reviewing and providing a global overview of the most outstanding aspects (packages, semiconductor internal structure, stack-ups, thermal considerations, etc.) of Si, SiC, and GaN power semiconductor technologies, and the degree of their use in electric vehicle powertrains. In addition, the paper also points out the trends that semiconductor technology and next-generation inverters will be likely to follow, especially when future prospects point to the use of “800 V" battery systems and increased switching frequencies. The internal structure and the characteristics of the power modules are disaggregated, highlighting their thermal and electrical characteristics. In addition, aspects relating to reliability are considered, at both the discrete device and power module level, as well as more general issues that involve the entire propulsion system, such as common-mode voltage.This work has been supported in part by the Government of the Basque Country through the fund for research groups of the Basque University System IT1440-22 and the Ministerio de Ciencia e Innovación of Spain as part of project PID2020-115126RB-I00 and FEDER funds. Finally, the collaboration of Yole Développement (Yole) is appreciated for providing updated data on its resources

A 3D Reduced Common Mode Voltage PWM Algorithm for a Five-Phase Six-Leg Inverter

Neutral point voltage control converters (NPVCC) are being considered for AC drive applications, where their additional degree of freedom can be used for different purposes, such as fault tolerance or common mode voltage (CMV) reduction. For every PWM-driven converter, the CMV is an issue that must be considered since it can lead to shaft voltages between rotor and stator windings, generating bearing currents that accelerate bearing degradation, and can also produce a high level of electromagnetic interference (EMI). In light of these considerations, in this paper a three-dimensional reduced common mode voltage PWM (3D RCMV-PWM) technique is proposed which effectively reduces CMV in five-phase six-leg NPVCCs. The mathematical description of both the converter and the modulation technique, in space-vector and carrier-based approaches, is included. Furthermore, the simulation and experimental analysis validate the CMV reduction capability in addition to the good behaviour in terms of the efficiency and harmonic distortion of the proposed RCMV-PWM algorithm.This work has been supported in part by the Government of Basque Country within the fund for research groups of the Basque University system IT1440-22 and MCIN/AEI/10.13039/ 501100011033 within the project PID2020-115126RB-I00

Modu-komuneko tentsioa: ibilgailu elektrikoen isilpeko etsai

Guztion ahotan dauden ezaugarriak dira ibilgailu elektrikoen autonomia, bateriak kargatzeko denbora edota kostua. Baina zer gertatzen da ibilgailuen fidagarritasunarekin? Zer faktorek eragin dezakete ibilgailu elektriko bat matxuratzea eta zirkulaziotik ateratzea? Besteak beste, publiko orokorrarentzat ezezaguna den baina espezialistek ongi ezagutzen duten arazo bati egin behar dio aurre ibilgailu elektriko baten propultsiosistemak: modu komuneko tentsioari

Ibilgailu elektrikoaren joera: 2030a helburu

Geroz eta ibilgailu elektriko gehiago ikusten ditugu kaleetan eta telebistako iragarkietan. Baina zenbat itxaron behar dugu ibilgailu elektriko bat erosteko? Errentagarriak dira? Merezi dute? Asko dira ibilgailu elektrikoaren inguruan sortzen diren galderak eta mesfidantzak. Artikulu honetan, ibilgailu elektrikoak barne hartzen dituen merkatu aldakor honen zenbait zalantza argitzen dira, begirada 2030ean jarrita